“Why is my stove clicking?” If you’ve ever wondered about this while preparing dinner, you’re not alone. The sound of a clicking stove can be both annoying and concerning. But before you panic and wonder if your appliances are possessed, take a deep breath and know that a clicking stove is a common issue. There are several reasons for the stove sparking or clicking; fortunately, many are easy to fix. In this blog, we’ll explore the common causes and solutions of a clicking stove, so you can get back to cooking up a storm without any unwanted sound effects.
Why is my stove making a clicking noise?
Firstly, it’s essential to understand “Why is my stove clicking” in the first place. When you turn the burner knob to ignite the stove, the igniter produces a spark. This spark ignites the gas in the burner, allowing the flame to burn and heat the pot or pan. However, if the stove or gas oven clicking continues even after the flame has been lit, it indicates the following:
Dirty Burner
A dirty burner is one of the most common causes of a clicking stove. Food particles, grease, and other debris can accumulate on the burner, preventing the gas from flowing correctly. This causes the stove igniter to continue clicking, as it’s trying to light the gas but can’t due to the blockage. To solve this issue, you need to clean the burner thoroughly.
Here’s how:
- Turn off the burner and let it cool down completely.
- Remove the burner grate and burner cap.
- Clean the burner and eliminate any dirt with a soft-bristled brush.
- Wipe the burner with a damp cloth and let it dry completely.
- Reassemble the burner cap and grate, and turn on the burner to see if the clicking noise has stopped.
Faulty Igniter
Another common cause of a clicking stove is a faulty igniter. If the igniter is worn out or damaged, it won’t be able to produce a spark to light the gas in the burner. In this case, you’ll need to replace the igniter.
Here’s how:
- Turn off the stove.
- Remove the burner grate and burner cap.
- Disconnect the igniter wire from the stove.
- Use a screwdriver to remove the igniter from the burner.
- Install the new igniter by following the manufacturer’s instructions.
- Reconnect the igniter wire and reassemble the burner cap and grate.
- Turn on the gas supply and test the burner to see if the clicking noise has stopped.
Loose Connections
Loose connections between the igniter and the control module can sometimes cause a clicking stove. If this is the case, you’ll need to check the connections and tighten them if necessary.
Here’s how:
- Turn off the stove.
- Remove the burner grate and burner cap.
- Locate the igniter and the control module.
- Check the connections between the two and tighten them if they’re loose.
- Reassemble the burner cap and grate.
- Turn on the gas supply and test the burner to see if the clicking noise has stopped.
Wet Burner
If you’ve recently cleaned your stove and water has gotten into the burner, it can cause the stove to click continuously. In this case, you’ll need to dry out the burner.
Here’s how:
- Turn off the stove.
- Remove the burner grate and burner cap.
- Use a dry cloth or paper towel to soak up any water in the burner.
- Let the burner dry completely before reassembling the burner cap and grate.
- Turn on the gas supply and test the burner to see if the clicking noise has stopped.
Control Module Failure
If none of the above solutions work and your stove continues to click, it may be due to a control module failure. The control module sends a signal to the igniter to produce a spark. If the module is faulty, it won’t send the signal, causing the stove to click continuously. In this case, you’ll need to replace the control module.
Here’s how:
- Turn off the stove.
- Disconnect the power supply to the stove.
- Remove the control panel cover.
- Disconnect the wiring harness from the control module.
- Remove the control module and install the new one following the manufacturer’s instructions.
- Reconnect the wiring harness and replace the control panel cover.
- Reconnect the power supply and turn on the gas supply to test the burner.
However, if nothing happens after doing all these troubleshooting tips, it may be time to call in the experts. At Expert Viking Appliance Repair, we specialize in Viking stove repair and others like Viking range repair and gas appliance repair. Our team of certified technicians has years of experience and can quickly pinpoint the root cause of “Why is my stove clicking”. Don’t let a clicking stove interrupt your cooking routine – call us today to schedule an appointment!